Holographic Display User’s Manual
Never disassemble the device without instructions!
Never try to remove the TF card from the device!
DSeeLabs 3D Holographic Display utilizes POV theory to display figures and videos to human’s bare eyes. The spinning lines of color-changing LEDs produce 3D views in the air. The device is energy efficient and made of the highest quality of China’s modern manufacturing industry.
A: Indicator LED
B: Reset button
C: Slave interface 2
D: Slave interface 1
E: Power interface
Power interface: use the AC adapter to supply power
Slave interface: used to connect to slave devices
Reset button: switch between master/slave modes; pair with remotes
Indicator led: indicating power supply, on/off, modes, etc.
Remote control instructions
Run: turn the device from ‘stand-by’ to ‘running’
Stop: turn the device from ‘running’ to ‘stand-by’
: play the prior
: play from the first
: play the next
Plug in the power cord, all LEDs will on and then off. At the back of the device, the indicator led is now in red.
Pair the remote
When the device is in ‘stand-by’ status, push the reset button. You’ll see the indicator led turned into blue.
Now, point your remote control to the device, and push the 100% button on the remote.
You’ll see the blue LED flashing and then turned into red.
Push the Run/stop button.
Shuffle the playlist
Use these buttons:
You can switch the mode of the device between Master and Slave.
When you are using only one device to display, use it in the Master mode.
When you are connecting multiple devices to display together, you should have only one Master device and the others should be in the Slave mode.
You can never control a device in its Slave mode by remote control.
- Switch modes
When the device is in ‘stand-by’ mode, push the reset button on the back of the device. You’ll see the indicator turned from red to off, this means your device is in Slave mode now.
When your device is in Slave mode, the indicator turned to red, this means your device is in Master mode now.
- Connections of multiple devices
You should have only one master mode device, the others should be set as slave mode.
Control using apps on cellphone and computers
The fan can be mounted to any surfaces/objects using the mounting system.
The first step is to fix the mounting system to the object using bolts:
The second step is to slip the back of your fan into the recess of the mounting system. Done!